The Newsway Valve Company 316 stainless steel ball valve has two-piece and three-piece valve body structures. The middle flange is connected by bolts and the seal is made of nickel-based alloy. There are no PTFE bearings on the upper and lower valve stems, reducing friction and labor-saving operation. There is no adjusting plate at the bottom of the small shaft to ensure the joint position of the ball and the sealing ring. Full bore diameter: The flow aperture of the valve is the same as the inner diameter of the pipeline, so that the pipeline can be cleaned.
Purchasing instructions for stainless steel ball valve products:
1. The standard price list of stainless steel ball valve products is a temporary price. The specific price has been negotiated with specific parameters. It depends on the material, diameter, size and pressure. For the specific price, you can contact us, and the real-time quotation shall prevail.
2. The product name of the stainless steel ball valve and the model of the stainless steel ball valve;
3. The operation mode of stainless steel ball valve (with manual turbine drive, pneumatic electric, etc.);
4. The material and hardness of the sealing surface of the stainless steel ball valve;
5. The body material of the stainless steel ball valve;
6. Pressure of stainless steel ball valve;
7. The medium used in the stainless steel ball valve (name, viscosity, particle corrosivity, toxicity;
8. We can produce stainless steel ball valves according to the drawings you provide; we can also produce them according to the drawings provided by our company.
9. The humanized packaging of stainless steel ball valve products can also be handled according to your requirements
Post time: May-12-2021