Cryogenic Globe Valve - Cryogenic Globe Valve – Newsway

Cryogenic Globe Valve

Key works: cryogenic, globe, valve, low, temperature, flange, LCC, rising stem.

PRODUCT RANGE:

Sizes: NPS 1/2″~NPS 16″

Pressure Range: CL150~CL1500

Temperature :-40℃ to -196℃

MATERIALS:

LCB､LCC､LC3､CF8､CF8M､CF3､CF3, LF2､F304､F316､F304L､F316Letc.

Drive device: handle, worm wheel, electric, pneumatic, pneumatic- hydraulic, electro-hydraulic

STANDARD

Design Features:

1.Antic blow-out stem

2.Swivel disc

3.Plug type

4.Bolted Bonnet or Pressure Seal Bonnet

5.Outside Screw & Yoke (OS&Y), Rising stem

6.Screwed in back seat

7.Zero leakage

8.RF, RTJ, or BW

Newsway Valve Cryogenic globe valve uses valve stem pressure to make the sealing face of valve clack and sealing face of valve seat fit tightly to cut off medium. It’s a forced seal valve.

Flow direction of medium in globe valve includes “low in and high out” and “high in and low out”. The medium is allowed to flow in only one direction. The valve shall be installed in right direction.

Cryogenic globe valve has structure of straight-through type, direct flow type and right angle type.

When globe valve is open, and the opening height of valve clack is up to 25% ~ 30% of nominal diameter of the globe valve, the flow reaches the maximum which show that the valve reaches the fully open position.

Newsway Valves Materials

NSW valve body and trim material can be offered in Forged type and Casting type. Next to stainless and carbon steel material, we also manufacture valves in special materials such as titanium, nickel alloys, HASTELLOY®*, INCOLOY®, MONEL®, Alloy 20, super-duplex, corrosion resistant alloys and urea grade materials.

Available materials