2020 China New Design Api 602 Y Strainer - Welded Flange Gate Valve – Newsway

Welded Flange Gate Valve

Key works: api602, forged, steel, a105, welded, flange, gate, valve, class 800

PRODUCT RANGE:

Sizes: NPS 1/2 to NPS2 (DN15 to DN50)

Pressure Range: Class 800, Class 150 to Class 2500

MATERIALS:

Forged (A105, A182 F304, F304L, F316, F316L, F51, F53, A350 LF2, LF3, LF5,)

STANDARD

Design Features:

1.Forged Steel,Outside Screw and Yoke,Rising Stem,
2.Non-Rising Handwheel,Integral Backseat,
3.Reduced Bore or Full Port,
4.Socket Welded,Threaded,Butt Welded,Flanged End

5.SW, NPT, RF or BW

6.Bolted Bonnet,Welded Bonnet and Pressure Sealed Bonnet.

7.Solid Wedge,Renewable Seat Rings,Sprial Wound Gasket,

API 602 Welded Flange Gate Valve

The opening and closing part of API 602 forged steel gate valve is a gate. The movement direction of the gate is perpendicular to the direction of the fluid. The forged steel gate valve can only be fully opened and closed, and cannot be adjusted and throttled. The gate of the forged steel gate valve has two sealing surfaces. The two sealing surfaces of the most common mode gate valve form a wedge shape, and the wedge angle varies with the valve parameters. The drive modes of forged steel gate valves are: manual, pneumatic, electric, gas-liquid linkage.

Forged steel gate valve refers to a valve in which the closing member (gate) moves in the vertical direction of the center line of the passage. The forged steel gate valve is mainly used for cutting off in the pipeline. The forged steel gate valve is a widely used valve, and it is generally used for cutting devices with caliber DN≤50.

Advantages of API 602 forged steel flange gate valve

1. Low fluid resistance.

2. The external force required for opening and closing is small.

3. The flow direction of the medium is not restricted.

4. When fully open, the erosion of the sealing surface by the working medium is smaller than that of the globe valve.

5. The shape is relatively simple and the casting process is good.

If you need more details about valves please contact NSW(newsway valve) sales department

Newsway Valves Materials

NSW valve body and trim material can be offered in Forged type and Casting type. Next to stainless and carbon steel material, we also manufacture valves in special materials such as titanium, nickel alloys, HASTELLOY®*, INCOLOY®, MONEL®, Alloy 20, super-duplex, corrosion resistant alloys and urea grade materials.

Available materials